Miscellaneous Parts
The standard for the industry for controlling electrically driven water pumps. Adjustable to 65 psi. 1 hp, 1/4″ FIPT.
Float Switches Valves
These float valves are completely mechanical and require no electrical power or wiring. Mechanical linkage of float and valve assures positive on-off action. When liquid levels drop, the float drops and activates the tank fill. When levels rise, the float rises and turns off the fill. These valves are fitted with an adjustable arm and [...]
Basket Risers Riser Tubes and Distributor Tubes
32mm Standard Mesh Basket Riser for Fleck 7000 Valves Only (BD32MM + DT32MM-72)
Basket Risers Riser Tubes and Distributor Tubes
1.050 Inch by 54 Inch Fine Mesh Basket Riser (BRT1050-54-FR)
Basket Riser for all Mineral Tanks 54″ and shorter using Fine Mesh resin. (Basket only shown in picture)
Brine Salt Tank Parts
Fleck 2310 Brine Valve Asm (FL2310BVSC) with 34″ Air Check Tube (FL60014)
Fleck 2310 Brine valve assembly including valve, float assembly, and 34″ air check. The elbow connection is for 3/8″ Tubing.
Miscellaneous Parts
1-1/4″ Cast Body. Maintains proper ratio of air to water in submersible water systems utilizing a bleed-back type of air control system.
Miscellaneous Parts
Square D Standard Duty Pressure Switch with Low Pressure Cut-off (FSG2M4)
The standard for the industry for controlling electrically driven water pumps. Adjustable. 1 hp, 1/4″ FIPT. Set to 30-50 PSI.
Float Switches Valves
Features a strong Alnico bar magnet hermetically-sealed inside so no other wetted material can contaminate liquid or be attacked by a corrosive liquid. Special molded thread helps when metal to plastic installations are used. Unique assembly procedure eliminates stress by actually suspending the reed switch allowing for thermal expansion and contraction. Round pivot pins add [...]
Float Switches Valves
For open tank or sump applications. The contacts open on liquid rise. Optional 1/4″ x 60″ Brass Float Rod, plastic float and rubber float stop available during checkout.
Mineral Tanks Parts
3/4 Inch C Series Plastic Distributor Head with Fill Port (C1190FP)
Designed for simple in-out filters such as pH neutralizers and carbon filters. Fits 2-1/2″ NPSM tank opening. Has 3/4″ openings and 1.050″ distributor opening. Features a removable top, or fill port, and an internal screen. The screen is easily serviced and cleaned by using the service wrench, provided with each head, to disassemble the head. [...]
Brine Salt Tank Parts
FL60027 – Works with most Brine tanks, that use a 3/8″ brine line O.D. tube. This 2300 Brass Safety Brine Valve 3/8″ is used with float in the Brine tank, to help prevent water from over flowing, if the control valve should ever malfunction.
Pot Perm Tanks
FL2300 valve Assembly including brass valve, float assembly and air check, fits commercial potassium permanganate tank PT183303.
Float Switches Valves
Used to control pumps, motors or other electrical devices. Normally Open (NO) refers to the switch contacts when the bulb is hanging in a vertical position. Use NO to turn a device on with high level. 10 ft. cord.
Float Switches Valves
Used to control pumps, motors or other electrical devices. Normally Closed (NC) refers to the switch contacts when the bulb is hanging in a vertical position. Use NC to turn a device off with high level. 15 ft. cord.