Complete Service Assemblies
1600 Brine Valve, Short Stem is commonly used in the Fleck 1500, 2500, 2750, 2850, 2900 valves. The piston assembly ( part #60029 ) should be replaced if the brine refill never stops. This Brine Valve is used with 3/8″ Brine Line Tubing, The 1600 ( or 3/8″ tubing size ), on softener tanks up [...]
Mineral Tanks Parts
3/4 Inch C Series Plastic Distributor Head with Fill Port (C1190FP)
Designed for simple in-out filters such as pH neutralizers and carbon filters. Fits 2-1/2″ NPSM tank opening. Has 3/4″ openings and 1.050″ distributor opening. Features a removable top, or fill port, and an internal screen. The screen is easily serviced and cleaned by using the service wrench, provided with each head, to disassemble the head. [...]
Brine Salt Tank Parts
FL60027 – Works with most Brine tanks, that use a 3/8″ brine line O.D. tube. This 2300 Brass Safety Brine Valve 3/8″ is used with float in the Brine tank, to help prevent water from over flowing, if the control valve should ever malfunction.
Inline Carbon Filters
Long life + cysts 2-7/8 inch OD 20 inch Length 0.5 micron nominal rating 45000 gallons of Chlorine Reduction tested at 2 ppm of chlorine 2 gpm flow rate
Inline Carbon Filters
Fits any housing that uses 2-1/2″ x 20″ cartridges 2.5 gpm flow rate
3/4"-20" Housings
Pentek Double-Duty Housing with Pressure Release and Integral Bracket, Blue (20-07B-PR-IB)
Fleck Control Valve Parts part number order
Old Part # FL14449 5600 Valve Body has 1.05″ distributor opening Includes “O” Rings FL13304 and FL12281.
Fleck 9000 Control Valve Parts
Lower Seals and Spacers Kit for the Fleck 9000 & 9100 valves
Replacement Media
An excellent medium density filtration media which works well in multi-media filter applications. Provides higher service flow rates and longer filter runs than equivalent sand filters. Anthracite Specifications
Replacement Media
ChemSorb Filter Granules 1/2 cubic foot Box (CHEM-SORB-50-BOX)
ChemSorb Filter Granules are used as a water/liquid, filter bed (or tank) material in lieu of sand/anthracite, pecan shells or other, coarse filtration material to efficiently remove suspended solids and fine turbidity particles. The filter granules physically filter and trap the suspended solids. In addition, the granules remove a wide range of colloidal and soluble, [...]
Stainless steel flow control with 1″ FIPT threads. Flow rates from 5 to 20 gpm. Provides an accurate and reliable liquid flow control between 30 and 120 psi.
Complete Service Assemblies
For Water Softeners & Manganese Greensand units. ** Back Wash and Rapid Rinse cycle times will be 10 minutes each. Standard Piston Assembly for Fleck 5600 valves used since 1979, will have a White Cap. Includes Part Numbers FL13247, FL10696, FL13001, FL12953, and FL13446 Uses Seal Kit # FL60125
