Showing 1–16 of 26 results

Complete Service Assemblies

Piston Assembly, Filter (FL60102-10)

$34.50

5600 Filter Piston Assembly used non-softening (Backwash Only) applications. ** Back Wash and Rapid Rinse cycle times will be 15 minutes each. Includes Part Numbers FL13852, FL10696, FL13001, FL12953, and FL13446 Uses Seal Kit # FL60125

Complete Service Assemblies

Piston End Plug Assembly (FL13446)

$9.50

Used on Fleck Residential Piston Assemblies

$182.00

Complete 5600SXT Timer Power Head, Including SXT Circuit Board, 24 volt Motor, Gears & Power Cord This Power Head is very simple to replace…!

Complete Service Assemblies

Seal & Spacer Kit (FL60125)

$15.00

Seal & Spacer Kit for the Fleck 5600, 9000 & 9100 valves. (Top Seals & Spacers 9000, and 9100 Valves.) Includes 5 Seals (FL13242) & 4 Spacers (FL14241) included with each Kit. (Not Sold Separately)

$127.00

For 5600 “L” bracket valves, Only. Complete with 120 volt 60 Hertz, 1/30 rpm Timer Motor, all internal gears, meter cable, back cover and power cord.

$178.00

Electronic Meter Cap, Only – (No Wiring) Includes 13847 “O” Ring, and is used on Fleck 3/4″, 1″, 1 1/2″ and 2 inch Electronic Meter Assemblies. This Fleck Part #14716 is used on the following Fleck Control Valves – 2750, 2850, 2900, 9000, 9100, 9500 and also on the XT or 3200 NXT timer/controllers.

Complete Service Assemblies

5600/4600 Brine Valve (FL60032)

$9.50

Brine Valve Piston Assembly for Fleck 5600 Valves Includes Part Numbers FL13302 x2, FL13172, FL12626, FL13165, FL13167, FL12550, FL11973, FL16098, and 11981-01

$112.00

Use this Powerhead on backwashing CARBON, CALCITE, CHEMSORB, BIRM type filters, ONLY. DO NOT Use this Powerhead on a Water Softener. FL60353 Complete with 120 volt 60 Hertz 1/30 rpm Timer Motor, all internal gears, back cover and power cord.

Complete Service Assemblies

5600 Injector Assembly (FL60084-0132)

$64.50

This 5600 injector assembly includes a new injector throat & nozzle, o-rings, BLFC & DLFC flow control buttons. The BLFC & DLFC buttons will be based on the diameter of your resin tank. Includes part numbers FL60032, FL13315 x2, FL13303, FL13163, FL10913U, FL10914, FL10227, FL13166, FL10329, FL10330, FL10332, BLFC Button, FL12977, FL13245, FL13244, FL12767, FL15348

$59.50

Piston and shaft Assembly used on the Fleck Downflow 5000, Proflo SE, and others water softener control valves. May also used on some of the newer Rainsoft Valves, that use the Fleck 5000 Valve Body design.

$103.00

FL60354 Complete with 120 volt 60 Hertz, 1/30 rpm Timer Motor, all internal gears, meter cable, back cover and power cord.

Complete Service Assemblies

5600 FL56C-G (Gray)

$19.00

Plastic Cover that simply slips over the top of the 5600 Powerhead, that helps protect it from Dust/Sun/Weather. Will Not work on the Electronic 5600SXT Model valve.

$145.00

Complete 5600SXT Circuit Board with Front Cover used to replace the old SE Front Cover and circuit board. This part is very simple to replace…! We have different “SXT” Control covers available for the following Fleck control valves that have the old “SE” modual, as shown. ProFlowSE 5600SE 2510SE 9100SE

$585.00

1″ Meter Assembly for Fleck 9000, with Standard Range Meter Cover (360 – 5,100 gallons). Extended Range Meter Cover (1,800 to 25,500 gallons) available … Special Order)

$103.00

Use Only On Water Softeners FL60353 Complete with 120 volt 60 Hertz 1/30 rpm Timer Motor, all internal gears, back cover and power cord.

$21.50

Seals and Spacers Kit for the Fleck 5000, Proflo SE, and some others. Includes 5 Seals, 4 Spacers, and 1 Special End Spacer The Special End Spacer should be installed first, inside the valve body, followed by the a regular seal, and then alternating with spacers, and ending with a seal on top. Also used [...]