Complete Service Assemblies
Piston and shaft Assembly used on the Fleck Downflow 5000, Proflo SE, and others water softener control valves. May also used on some of the newer Rainsoft Valves, that use the Fleck 5000 Valve Body design.
Replacement Media
High Capacity Cation Softening Resin 1/2 Cubic Box (CATION-50-BOX)
High Capacity Cation Softening ion exchange resin for use in any water softening system, with Clear Water Iron levels up to 3 ppm. 1/2 cubic foot.Cation Resin Specifications Cation Resin MSDS
Carbon & KDF 55
1/2 cubic. Activated Carbon 12 x 40 is an excellent filtration medium with excellent adsorptive properties. Used for the removal of taste and odors, chlorine, etc. Periodic backwashing is required in down-flow filters. Maximum carbon life is usually three years. This activated carbon is ‘water washed’ and much cleaner than many products found on the [...]
Replacement Media
3/4 cubic foot. Filter Ag is a very efficient filter medium for the removal of suspended material and turbidity. Less pressure loss and finer filtration is possible because of its light weight and irregular surface characteristics. Filter Ag Plus Specifications
Replacement Media
An excellent medium density filtration media which works well in multi-media filter applications. Provides higher service flow rates and longer filter runs than equivalent sand filters. Anthracite Specifications
Replacement Media
ChemSorb Filter Granules 1 cubic foot Box (CHEM-SORB-100-BOX)
ChemSorb Filter Granules are used as a water/liquid, filter bed (or tank) material in lieu of sand/anthracite, pecan shells or other, coarse filtration material to efficiently remove suspended solids and fine turbidity particles. The filter granules physically filter and trap the suspended solids. In addition, the granules remove a wide range of colloidal and soluble, [...]
Fleck Control Valve Parts part number order
Fleck Stuffer Tool that helps when installing seals and spacers in Fleck 2500, 2510, 2700, 2750, 2900 ( upper ) & 3600 Valve seal kit.
Iron Filters
1″ adjustable PVC Air Injector. Requires a minimum 1.5 gpm & maximum 15 gpm flow rate to operate properly.
Complete Service Assemblies
3200 Timer Assembly with 7 Day Skipper Wheel. Includes 120 volt Timer Motor and wiring harness. For use on Fleck 1500, 2500, 2510, 2750, 2800 & 2900 Drive Assemblies.
Pro Products Supplies
Pro Softener Mate 24 oz. Bottle (Case of 12) (SOFTENER MATE-24 CASE)
Save 46% per bottle! Use 3 ounces of Softener Mate, per cu/ft of resin, mixed with at least 1 quart of warm water for softener units less than 2 cuft, and up to 3 – 5 gallons of warm water, for larger commercial units.
BigBlue 20" Carbon
Long life + cysts 4-5/8 inch OD 20 inch Length 0.5 micron nominal rating 150000 gallons of Chlorine Reduction tested at 2 ppm of chlorine 4 gpm flow rate
Fleck Control Valve Parts part number order
This 1/15 RPM Motor is Rare. Used on some Fleck and other brands using Fleck type valves. Be sure this is what you need before placing your order.
Microline Filters
This set includes one each of the S7011, S7025, and S1224RS membrane. This set also includes the 6″ in-line carbon post-filter. Choose S7206W with 3/8″ threaded connections (replaces S7206C and S7206C-06) or the newer S7206W-JG with 3/8″ tube connections during checkout. . Membrane Storage Tip – RO Membrane cartridges that will not be installed or [...]