Hallett Lamps & Sleeves
(Lamp length is approximately 17″)
Brine Salt Tank Parts
Top Part – FL60038 – Fleck 2350 Brine Valve Shut Off Includes FL60028 Float & 900 Air Check Normally used with the 1800 brine systems that use 3/4″ tubing. It can also be used with the 1700 brine systems that use 1/2″ tubing, but you will need to use a reducer fitting to “bush” down [...]
Hallett Lamps & Sleeves
(Lamp length is approximately 21″)
Fleck Control Valve Parts part number order
Circuit Board Only, (Used on 5600SXT Valve)
Replacement Media
Purolite SST 60 High Efficiency Softening Resin 1/2 Cubic Foot Box (SST-60-50-BOX)
Quality Purolite SST 60 “Salt Saving Technology” Softening ion exchange resin. For use in any water softening system, with Clear Water Iron up to 5 ppm, and will use 1/3 Less Salt than our Standard High Capacity & Fine Mesh Resins. 1/2 cubic foot. Purolite SST60 Specifications
Iron Removal Media
For iron, manganese and hydrogen sulfide removal. No regenerates required, backwash only. Will not remove orange iron, tannins or sulphur bacteria. 60 lb. box. Pyrolox Specifications
Fleck Control Valve Parts part number order
Upper Puller Tool Assembly, 2900, 3100 & 3150 Valves (FL12682)
Tool used to make removal of Seals and Spacers in the Fleck 2900 Valve easier.
Complete Service Assemblies
Complete 5600SXT Timer Power Head, Including SXT Circuit Board, 24 volt Motor, Gears & Power Cord This Power Head is very simple to replace…!
Iron Removal Media
1 cubic foot, 66 lbs. per bag. High performance media for iron, hydrogen sulfide, and manganese removal. No oxidizing chemicals needed for regeneration, only periodic backwashing. Katalox Light®-media can be used in a pH range of 5.8 – 10.5. Recommended flow rates are based on the concentration of the iron, manganese and other mentioned contaminant [...]
Hot Water Mineral Tanks
Structural Fiberglass Hot Water Tank
Hallett Lamps & Sleeves
(Lamp length is approximately 25″)