Used on the Fleck 2310 Safety Brine Valve Assembly. 3/8″ Tube x 48″ Long, with air check at bottom, can be cut to fit. Installation Note: If you are only using this Air Check Assembly inside your brine tank, without a float assembly, you will need a 3/8″ x 3/8″ Fitting Elbow – # 12794 [...]

Stripped 5600 Injector Drain Module Body You may want to also order the four new “O” rings listed, that are installed between the Injector Body and 5600 Valve body. (We have found that “O” Rings over 5 years old will generally not reseal.) 1ea – 13303, 1ea – 12638, 2ea – 13301

Used on Fleck 3200 Timer assemblies(FL13870-01 used on 3210 Timer assemblies)

Used on Fleck 3210 Timer assemblies(FL13870) used on 3200 Timer assemblies)

Used in the Fleck 2750 – 1700 Brine Assembly

“U” shaped metal tube used ONLY on the model Fleck 2850, w/1700 Injector Module and 1700 Brine Valve.( 9.123″ total length).

Stripped 9000 Injector Drain Module Body You may want to also order the four new “O” rings listed, that are installed between the Injector Body and 9000 Valve body. (We have found that “O” Rings over 5 years old will generally not reseal.) 1ea – 13302, 1ea – 13303, 2ea – 13301

17.5″ Cable used on the Fleck 2750, 3150, & 3900 metered valves.

7000 Brine Valve Assembly, 560CD

3/4″ female NPT Stainless Steel Yoke for Fleck Valves. (Brass was used in the past)

Used on Fleck 3150 valve

Used on the Fleck 2750 valveFL60365-001/2″ x 3/4″

Used in the Fleck 2750 Piston Assembly (FL60090-HF)

Please Note: 24 Volt Timer Motor is 1/30 rpm. Old Part # FL13494 and FL19659, and will require a 24 volt AC transformer. The new motors will not look exactly like the older versions, but these motors are the replacement motors, supplied to us by the manufacturer. Also, this 24V motor will have a metal [...]