Fleck Control Valve Parts part number order
Environmental Backplate – Fleck 2510 2750, 2850 Valves (18697)
Stainless Steel Backplate, used on the Fleck 2510 2750, 2850 Valves. Uses “Environmental” cover, PN 60219-02
Complete Service Assemblies
FLEC-DG New Style Cover with “Weather-Proof Seal, for Fleck 2850, 2900 & 9500 Fleck valves that have the special hinged back plate. Cover includes plastic hinge pin.
Complete Service Assemblies
1600 Brine Valve, Short Stem is commonly used in the Fleck 1500, 2500, 2750, 2850, 2900 valves. The piston assembly ( part #60029 ) should be replaced if the brine refill never stops. This Brine Valve is used with 3/8″ Brine Line Tubing, The 1600 ( or 3/8″ tubing size ), on softener tanks up [...]
Fleck Control Valve Parts part number order
Old Part # FL14449 5600 Valve Body has 1.05″ distributor opening Includes “O” Rings FL13304 and FL12281.
Fleck 9000 Control Valve Parts
Lower Seals and Spacers Kit for the Fleck 9000 & 9100 valves
Complete Service Assemblies
For Water Softeners & Manganese Greensand units. ** Back Wash and Rapid Rinse cycle times will be 10 minutes each. Standard Piston Assembly for Fleck 5600 valves used since 1979, will have a White Cap. Includes Part Numbers FL13247, FL10696, FL13001, FL12953, and FL13446 Uses Seal Kit # FL60125
Complete Service Assemblies
FLEC-DG New Style Cover with “Weather-Proof Seal, for Fleck 2510, 2750, 2850, 2900, 9000, 9100 and 9500 Fleck valves that have the special hinged back plate. Cover includes plastic hinge pin.
Complete Service Assemblies
Old Style Designer Cover used on Fleck 1500, 2500, 2510, 2700, 2750, 2850, 2900, 9000 , 9100 and 9500 Valves. Works with older valves that have the Thumbscrews on either side of the cover.
Fleck Control Valve Parts part number order
Please Note: 24 Volt Timer Motor is 1/30 rpm. Old Part # FL13494 and FL19659, and will require a 24 volt AC transformer. The new motors will not look exactly like the older versions, but these motors are the replacement motors, supplied to us by the manufacturer. Also, this 24V motor will have a metal [...]
Fleck Control Valve Parts part number order
Used on the Fleck Commercial Valves
Complete Service Assemblies
Piston Assembly, 5600SE, 5600SXT and 6700 (Softener) (FL60102-71)
Standard Softener Piston Assembly for Fleck 5600SXT & 6700 valves. Will have a GREEN Cap. Uses Seal Kit # FL60125
Complete Service Assemblies
Used on Fleck 2900s (Upper Piston), If you have a 1 Piece “S” Casting, then you should use Fleck Part # 61540 Piston Assembly (With the Seal Kit # 61530), that has a longer Shaft. These Parts can be located on page 12, of the Fleck 2900s Service Manual, Items # 33 & 34.
Fleck Control Valve Parts part number order
Stripped 3/4″ Meter Body. Includes 4ea Adapter “O” Rings (FL13305), only. All other parts for this meter body should be purchased separatley. This plastic 3/4″ meter Body commonly used on 5600, 2510 & 9000 valves.
Fleck Control Valve Parts part number order
Used on Fleck Models 5000, 5600, 2510 & 8500 valves with the “SE” Electronic Displays.