Fleck Control Valve Parts part number order

3/4″ EXTENDED RANGE Meter Dome (FL15150)

$127.00

3/4″ EXTENDED RANGE 3/4″ Black Plastic Meter Dome normally used on some Commercial applications with Fleck Metered Valves, including the 2500, 2510, 5600, 9000 & 9100 models. Includes Meter Cover Assembly “O” Ring # FL13847 If your meter dial numbers are “1” to “21”…. DO NOT ORDER THIS Meter Cover – Use part # 14038 [...]

$130.00

3200 Timer Assembly with 12 Day Skipper Wheel. Includes 120 volt Timer Motor and wiring harness. For use on Fleck 1500, 2500, 2510, 2750, 2800 & 2900 Drive Assemblies.

Fleck Control Valve Parts part number order

Connecting Tank Yoke Assembly 12.5″(FL15823-16)

$130.00

Used on the Fleck 9000 valve.

Fleck 7000 Control Valve Parts

7000 Piston Assembly, Softener FL61542-10

$143.00

7000 Softener Piston Assembly, Down Flow, Up to 35 GPM Flow Rate

$147.00

Complete Meter Module includes meter cover, meter body, impeller, orings, mounting clips, and screws. This is the standard range 3/4″ meter used on residential Fleck Econominder Valves. This standard range meter has a program wheel with numbers 0 – 21 (0 – 2,100 gallons maximum capacity setting ).

Fleck 7000 Control Valve Parts

7000 Piston Assembly, Softener FL61453-10

$149.00

7000 Softener Piston Assembly, Down Flow, Up to 28 GPM Flow Rate

$150.00

FL60353-24 Complete with 24 volt, 1/30 rpm Timer Motor, all internal gears, back cover. Requires Transformer

Fleck 7000 Control Valve Parts

7000 BW Filter Piston Assembly, 61452-20

$150.00

7000 Backwashing Filter Piston Assembly, Down Flow, up to 35 GPM Flow Rate. Used for Backwashing Filters only; Calcite, Sediment, Birm, Carbon, ChemSorb…

$150.00

Use this Powerhead on backwashing CARBON, CALCITE, CHEMSORB, BIRM type filters, ONLY. DO NOT Use this Powerhead on a Water Softener. FL60353 Complete with 120 volt 60 Hertz 1/30 rpm Timer Motor, all internal gears, back cover and power cord.

Complete Service Assemblies

Drive Motor – 24V 60 Hz – (FL42579)

$150.00

$165.00

Use Only On Water Softeners FL60353 Complete with 120 volt 60 Hertz 1/30 rpm Timer Motor, all internal gears, back cover and power cord.

$165.00

Used on Fleck “SE” & SXT Models – 5000, 5600, 2510, 9000, 9100 Electronic Metered valves. Includes clips, orings and screws. Optional Meter Cable for this Turbine Meter Assembly is part number 19791-01 and is sold separately. (FL19797 – Without SS Clips & Screws)

$165.00

For 5600 “L” bracket valves, Only. Complete with 120 volt 60 Hertz, 1/30 rpm Timer Motor, all internal gears, meter cable, back cover and power cord.

$167.00

Old Part #’s FL14927, FL18738 & FL42250 Drive Motor (FL18738 or FL61633-01), used on Fleck 9000,9100 & 9500 twin tank valves to operate pistons during regeneration cycle. If the valve gears are not turning, check the condition of the Middle Drive Gear (FL15135-02). If this gear is damaged, it can end up being the real [...]

$178.00

Electronic Meter Cap, Only – (No Wiring) Includes 13847 “O” Ring, and is used on Fleck 3/4″, 1″, 1 1/2″ and 2 inch Electronic Meter Assemblies. This Fleck Part #14716 is used on the following Fleck Control Valves – 2750, 2850, 2900, 9000, 9100, 9500 and also on the XT or 3200 NXT timer/controllers.