-
×
Program Wheel, Pinion Drive (FL17724)
1 × $5.00 -
×
End Spacer (FL10757 B)
1 × $5.00
-
×
Clip, Spring (FL17513)
1 × $3.00
$50.00
FL 13398 Stainless Steel Yokes have replaced the old Brass Yokes that were used in the past, and will fit on the Fleck 5600, 6600, 6700, 2510, 9000-3/4″ and the 9100 valves.
Fleck Control Valve Parts part number order
$50.00
Please Note:Tank “O” Ring (FL18303) & Slip Ring (FL19197) used with this Adapter Base, ARE NOT INCLUDED on this part. Used on Standard Resin Tank openings (2 1/2″ x 8 thread).
Fleck Control Valve Parts part number order
$52.00
Used on Fleck Models 5000, 5600, 2510 & 8500 valves with the “SXT” Electronic Displays.
Complete Service Assemblies
$55.00
5600 Filter Piston Assembly used non-softening (Backwash Only) applications. ** Back Wash and Rapid Rinse cycle times will be 15 minutes each. Includes Part Numbers FL13852, FL10696, FL13001, FL12953, and FL13446 Uses Seal Kit # FL60125
$55.00
Compatible with Fleck 5600, 5600 sxt, 9100, 9100 sxt and Duraline models.
Complete Service Assemblies
$55.00
Seals and Spacers Kit for the Fleck 5000, Proflo SE, and some others. Includes 5 Seals, 4 Spacers, and 1 Special End Spacer The Special End Spacer should be installed first, inside the valve body, followed by the a regular seal, and then alternating with spacers, and ending with a seal on top. Also used [...]
Complete Service Assemblies
$55.00
Seals and Spacers Kit for the Fleck 5000, Proflo SE, and some others. Includes 5 Seals, 4 Spacers, and 1 Special End Spacer The Special End Spacer should be installed first, inside the valve body, followed by the a regular seal, and then alternating with spacers, and ending with a seal on top. Also used [...]
Fleck Control Valve Parts part number order
Environmental Backplate – Fleck 2510 2750, 2850 Valves (18697)
$58.00
Stainless Steel Backplate, used on the Fleck 2510 2750, 2850 Valves. Uses “Environmental” cover, PN 60219-02
Complete Service Assemblies
$58.50
FLEC-DG New Style Cover with “Weather-Proof Seal, for Fleck 2850, 2900 & 9500 Fleck valves that have the special hinged back plate. Cover includes plastic hinge pin.
Complete Service Assemblies
$59.00
1600 Brine Valve, Short Stem is commonly used in the Fleck 1500, 2500, 2750, 2850, 2900 valves. The piston assembly ( part #60029 ) should be replaced if the brine refill never stops. This Brine Valve is used with 3/8″ Brine Line Tubing, The 1600 ( or 3/8″ tubing size ), on softener tanks up [...]
Fleck Control Valve Parts part number order
$59.00
Old Part # FL14449 5600 Valve Body has 1.05″ distributor opening Includes “O” Rings FL13304 and FL12281.
Fleck 9000 Control Valve Parts
$60.00
Lower Seals and Spacers Kit for the Fleck 9000 & 9100 valves
Complete Service Assemblies
$60.00
For Water Softeners & Manganese Greensand units. ** Back Wash and Rapid Rinse cycle times will be 10 minutes each. Standard Piston Assembly for Fleck 5600 valves used since 1979, will have a White Cap. Includes Part Numbers FL13247, FL10696, FL13001, FL12953, and FL13446 Uses Seal Kit # FL60125