Float Switches Valves
Features a strong Alnico bar magnet hermetically-sealed inside so no other wetted material can contaminate liquid or be attacked by a corrosive liquid. Special molded thread helps when metal to plastic installations are used. Unique assembly procedure eliminates stress by actually suspending the reed switch allowing for thermal expansion and contraction. Round pivot pins add [...]
Fleck Control Valve Parts part number order
Used on Fleck Models 5000, 5600, 2510 & 8500 valves with the “SXT” Electronic Displays.
Fleck 9000 Control Valve Parts
Top Piston Assembly used on the Fleck 9000 & 9100 valves Uses Seal Kit # FL60125
Complete Service Assemblies
5600 Filter Piston Assembly used non-softening (Backwash Only) applications. ** Back Wash and Rapid Rinse cycle times will be 15 minutes each. Includes Part Numbers FL13852, FL10696, FL13001, FL12953, and FL13446 Uses Seal Kit # FL60125
Compatible with Fleck 5600, 5600 sxt, 9100, 9100 sxt and Duraline models.
Float Switches Valves
For open tank or sump applications. The contacts open on liquid rise. Optional 1/4″ x 60″ Brass Float Rod, plastic float and rubber float stop available during checkout.
Fleck Control Valve Parts part number order
Environmental Backplate – Fleck 2510 2750, 2850 Valves (18697)
Stainless Steel Backplate, used on the Fleck 2510 2750, 2850 Valves. Uses “Environmental” cover, PN 60219-02
Complete Service Assemblies
FLEC-DG New Style Cover with “Weather-Proof Seal, for Fleck 2850, 2900 & 9500 Fleck valves that have the special hinged back plate. Cover includes plastic hinge pin.
Complete Service Assemblies
1600 Brine Valve, Short Stem is commonly used in the Fleck 1500, 2500, 2750, 2850, 2900 valves. The piston assembly ( part #60029 ) should be replaced if the brine refill never stops. This Brine Valve is used with 3/8″ Brine Line Tubing, The 1600 ( or 3/8″ tubing size ), on softener tanks up [...]
Mineral Tanks Parts
3/4 Inch C Series Plastic Distributor Head with Fill Port (C1190FP)
Designed for simple in-out filters such as pH neutralizers and carbon filters. Fits 2-1/2″ NPSM tank opening. Has 3/4″ openings and 1.050″ distributor opening. Features a removable top, or fill port, and an internal screen. The screen is easily serviced and cleaned by using the service wrench, provided with each head, to disassemble the head. [...]
Brine Salt Tank Parts
FL60027 – Works with most Brine tanks, that use a 3/8″ brine line O.D. tube. This 2300 Brass Safety Brine Valve 3/8″ is used with float in the Brine tank, to help prevent water from over flowing, if the control valve should ever malfunction.
Fleck Control Valve Parts part number order
Old Part # FL14449 5600 Valve Body has 1.05″ distributor opening Includes “O” Rings FL13304 and FL12281.
Fleck 9000 Control Valve Parts
Lower Seals and Spacers Kit for the Fleck 9000 & 9100 valves