-
×
PG100V 1/4 Inch x 100 PSI Side Mount
1 × $17.50
Out of stock
$60.00
Stainless steel flow control with 1″ FIPT threads. Flow rates from 5 to 20 gpm. Provides an accurate and reliable liquid flow control between 30 and 120 psi.
Complete Service Assemblies
$60.00
For Water Softeners & Manganese Greensand units. ** Back Wash and Rapid Rinse cycle times will be 10 minutes each. Standard Piston Assembly for Fleck 5600 valves used since 1979, will have a White Cap. Includes Part Numbers FL13247, FL10696, FL13001, FL12953, and FL13446 Uses Seal Kit # FL60125
Out of stock
Float Switches Valves
$61.00
Used to control pumps, motors or other electrical devices. Normally Open (NO) refers to the switch contacts when the bulb is hanging in a vertical position. Use NO to turn a device on with high level. 10 ft. cord.
Complete Service Assemblies
$62.00
FLEC-DG New Style Cover with “Weather-Proof Seal, for Fleck 2510, 2750, 2850, 2900, 9000, 9100 and 9500 Fleck valves that have the special hinged back plate. Cover includes plastic hinge pin.
Complete Service Assemblies
$62.00
Old Style Designer Cover used on Fleck 1500, 2500, 2510, 2700, 2750, 2850, 2900, 9000 , 9100 and 9500 Valves. Works with older valves that have the Thumbscrews on either side of the cover.
Fleck Control Valve Parts part number order
$63.00
2 RPM Motor Used on the Fleck 5600SE, 5600SXT, 6600 and 6700 control valves 24v motor Fleck Part #16943 – 120 volt 60 hz 2 rpm, is OBSOLETE NOTE: This 2 RPM motor is now only available in 24 volt (Requires 24v Transformer Fleck Part #19674).
Float Switches Valves
$64.00
Used to control pumps, motors or other electrical devices. Normally Closed (NC) refers to the switch contacts when the bulb is hanging in a vertical position. Use NC to turn a device off with high level. 15 ft. cord.
Out of stock
Fleck Control Valve Parts part number order
$64.00
Please Note: 24 Volt Timer Motor is 1/30 rpm. Old Part # FL13494 and FL19659, and will require a 24 volt AC transformer. The new motors will not look exactly like the older versions, but these motors are the replacement motors, supplied to us by the manufacturer. Also, this 24V motor will have a metal [...]
Fleck Control Valve Parts part number order
$64.00
Used on the Fleck Commercial Valves
Fleck 9000 Control Valve Parts
$64.00
Injector/ Drain Module used on the Fleck 9000 and 9100 control valves. Includes new injectors, o-rings, BLFC and DLFC, based on resin tank diameter.