Fleck 2510 Air injection Iron Sulfur & Manganese Filters
Great At Removing High Iron & High H2s (sulfur-rotten egg smell)
Air Injection Oxidizing Filter Systems
The Air Plus Iron Filter system below works with wells with submersible and jet pumps
SALT AND CHEMICAL FREE!!!
The Air Plus Air Injection Oxidizing Filter System, as a single tank system, is an efficient and cost effective system for the removal of iron and sulphur. The Air Plus maintains an “air pocket” in the top of the tank while the system is in service. As the water passes thru the air pocket, iron and sulphur are oxidized. Additionally, dissolved oxygen is added to the water. The filter media bed then removes the iron and sulphur from the water. The Air Plus can remove up to 4 ppm Hydrogen Sulfide and up to 7 ppm Iron. A daily backwash will remove accumulated iron and replenish the filter media bed. The regeneration process also adds a fresh air pocket to the system.
The Air Plus system comes equipped with a Fleck 2510 air injection control head that automatically back washes the system daily to clean the media and flush everything down the drain.The Air Plus is able to put the whole oxidation process inside one tank, keeping maintenance costs and down time to a minimum. The systems include by-pass valve, Structural mineral tank and all necessary media and support bed for individual application.
note: ph minimum of 6.8
• 1.0 CUBIC FEET OF MEDIA • 9X48 INCH MINERAL TANK • FLECK 2510 CONTROLLER AIR INJECTION CONTROL VALVE • 3/4 OR 1" BYPASS • COMPLETE SYSTEM DIMENSIONS 10X10X56
• 1.5 CUBIC FEET OF MEDIA • 10X54 INCH MINERAL TANK • FLECK 2510 CONTROLLER AIR INJECTION CONTROL VALVE • 3/4 OR 1" BYPASS • COMPLETE SYSTEM DIMENSIONS 12X14X62
• 2.0 CUBIC FEET OF MEDIA • 12X52 INCH MINERAL TANK • FLECK 2510 CONTROLLER AIR INJECTION CONTROL VALVE • 3/4 OR 1" BYPASS • COMPLETE SYSTEM DIMENSIONS 10X14X62