We recommend replacement of the Lower (FL60133), and Upper Seals Kits, at the same time. This Part can be located on page 14, of the Fleck 9500 Service Manual.

Lower Piston Assembly for Fleck 9500 This Part can be located on page 14, of the Fleck 9500 Service Manual.

Upper Piston Assembly for Fleck 9500 This Part can be located on page 14, of the Fleck 9500 Service Manual.

SPECIAL ORDER: Plz allow 7 – 10 business days for delivery, once order has been placed. Assembly includes two 1-1/2″ Copper pipes, 4 “O”rings (17224), 2 coupling retainer (17061), 4 pipe couplings, (17052), and 8 screws (15137). If you have resin tanks larger than 16” diameter, please contact us by Phone at 888-644-6426, or by [...]

Fleck 1700 Brine System, has a 1/2″ brine tubing connection, that is normally used on 9500, Twin Tank Softener Valve. We include a 2.0 gpm BLFC (Brine Line Flow Control) button, with this assembly. This Part can be located on page 17, of the Fleck 9500 Service Manual.

The 1600 Brine Valve is seldom used on the 9500, as it is only 3/8″ O.D. It may be used, if the resin tank is 16″ in diameter, or less. The larger 1/2″ O.D. (FL60039), is more commonly used on the 9500 valve. This is the part that normally needs to be replaced, if the [...]

Complete Brass 1-1/2 ” Meter Assembly, used on the Fleck 2850 and 9500 Valves. Ext. Meter Range: 3,125 to 53,125 gallons This Part can be located on page 22, of the Fleck 2850 Service Manual.

Complete Brass 1-1/2 ” Meter Assembly, used on the Fleck 2850 and 9500 Valves. Standard Meter Range: 625 – 10,625 gallons This Part can be located on page 22, of the Fleck 2850 Service Manual.

This NHWBP (No Hard Water Bypass) Piston Does Not allow water to flow past the valve, during regeneration.