Showing 897–912 of 1811 resultsSorted by price: low to high

Out of stock
$108.45

Includes one each of 104381, 104382, 104032. .Membrane Storage Tip – RO Membrane cartridges that will not be installed or used immediately, should be stored in a refrigerator to help prevent contamination of the cartridge. (Do Not Freeze…!)

$110.00

1/2 cubic. Activated Carbon 12 x 40 is an excellent filtration medium with excellent adsorptive properties. Used for the removal of taste and odors, chlorine, etc. Periodic backwashing is required in down-flow filters. Maximum carbon life is usually three years. This activated carbon is ‘water washed’ and much cleaner than many products found on the [...]

Out of stock
$110.00

4 gpm flow rate 2-3/4 x 9-3/4

$112.00

GreensandPlus is a purple-gray filter media used for removing soluble iron, manganese, hydrogen sulfide, arsenic and radium from well water supplies. Like its sister product manganese greensand, the substrate media has a manganese dioxide coated surface that acts as a catalyst in the oxidation- reduction reaction of iron and manganese. The difference between GreensandPlus and [...]

$113.00

Replacement Membrane element for the 720 gallon-per-day GE Merlin? Tankless Reverse Osmosis System. This membrane should be changed every 3 years. (Two RO membranes are required for the Merlin RO unit). Price listed is for a single membrane filter.Membrane Storage Tip – RO Membrane cartridges that will not be installed or used immediately, should be [...]

$114.00

(Riser tube not included). For 30″ tanks. 6 laterals.

$115.00

Used on Fleck 2750 & 2900 (Upper Piston), 2 Piece Casting Valves, when the backwash flow rate is higher than 7 GPM, or if the Service Flow Rate is higher that 12 GPM. If you have a 1 Piece Casting, then you should use Fleck Part # 61540 & Seal Kit, that has a longer [...]

$115.00

Fits any housing that uses 4-1/2″ x 20″ cartridges 5 gpm flow rate

$115.00

We recommend replacement of the Lower and Upper (FL60134) Seals Kits, at the same time. This Part can be located on page 14, of the Fleck 9500 Service Manual.

$115.00

Our 10% High Capacity Cation Softening ion exchange resin is more Chlorine Resistant than our Standard 8% Crosslink High Capacity Resin. For use in any water softening system, with a Chlorinated Water Supply. Will also remove up to 3 ppm of Clear Water Iron 1/2 cu/ft.Cation CR10 Specifications Cation Resin MSDS

Softener, Tannin & Nitrate Resin

Indion Fine Mesh Water Softener Resin 0.5 Cubic Ft

$115.00

Brine Salt Tank Parts

24 Inch Round Brine Grid

$117.00

$120.00

Nelsen Iron Blend, a combination of Filter Ag and Birm, is the standard media for our Terminator Systems. Birm Specifications Filter Ag Specifications