Iron Removal Media
1/2 cubic foot. Birm is used to remove dissolved iron and manganese. The pH must be above 6.8 and dissolved oxygen content must be equal to 15% of the iron and manganese content. No regeneration is required, only periodic backwashing. Birm Specifications NOT FOR SALE FOR USE IN CALIFORNIA!Birm Product Update
Complete Service Assemblies
This 5600 injector assembly includes a new injector throat & nozzle, o-rings, BLFC & DLFC flow control buttons. The BLFC & DLFC buttons will be based on the diameter of your resin tank. Includes part numbers FL60032, FL13315 x2, FL13303, FL13163, FL10913U, FL10914, FL10227, FL13166, FL10329, FL10330, FL10332, BLFC Button, FL12977, FL13245, FL13244, FL12767, FL15348
Gravel & Garnet
.38 cubic foot bag, 50 lbs. #8-12 Garnet is a high hardness, high density filter material used as a support bed in backwashing filters with heavy medias such as Filox, Pyrolox, Calcite, Filter Sand, Chemsorb, Birm & Greensand. Garnet Specifications
Gravel & Garnet
.38 cubic foot bag, 50 lbs. #8 Garnet is a high hardness, high density filter material used as a support bed in backwashing filters with heavy medias such as Filox, Pyrolox, Calcite, Filter Sand, Chemsorb, Birm & Greensand. Garnet Specifications
Gravel & Garnet
.36 cubic foot bag, 50 lbs. #30-40 Garnet is a high hardness, high density filter material used as a support bed in backwashing filters with heavy medias such as Filox, Pyrolox, Calcite, Filter Sand, Chemsorb, Birm & Greensand. Garnet Specifications
Carbon & KDF 55
3/4 cubic foot. Coconut shell carbon, because it is comprised of predominantly microporous structures, is a superior performing product for the removal of chlorine, chlorinated solvents and VOCs. It is also harder and can stand up to more backwashing than bituminous coal based carbon. 12 x 30 Mesh. Carbon Specifications
Nimbus Sierra Filters
Stage 3: The reverse osmosis membrane reduces dissolved salts, metals, microorganisms and other impurities. (Replace every 12 months). .Membrane Storage Tip – RO Membrane cartridges that will not be installed or used immediately, should be stored in a refrigerator to help prevent contamination of the cartridge. (Do Not Freeze…!)
This set includes one each of the S7028, S7025, and S1229RS membrane and will only work on Rayne TFC systems without the “-RC” suffix on the pre and post filters. This set also includes the 6″ in-line carbon post-filter. Choose S7206W with 3/8″ threaded connections (replaces S7206C and S7206C-06) or the newer S7206W-JG with 3/8″ [...]
Fleck Control Valve Parts part number order
Fleck Control Valve Parts part number order
2 RPM Motor Used on the Fleck 5600SE, 5600SXT, 6600 and 6700 control valves 24v motor Fleck Part #16943 – 120 volt 60 hz 2 rpm, is OBSOLETE NOTE: This 2 RPM motor is now only available in 24 volt (Requires 24v Transformer Fleck Part #19674).