Fleck Control Valve Parts part number order
Fleck Control Valve Parts part number order
Used on Fleck Models 7000 valve Input: 120v ac 50/60Hz 15w Output: 24v ac 400mA
Complete Service Assemblies
** Low Water Softener Piston Assembly for Fleck 5600 Mechanical (Non-SXT) valves. Will have a GRAY Cap. ** Back Wash and Rapid Rinse cycle times will be 7 minutes each. Uses Seal Kit # FL60125
Fleck Control Valve Parts part number order
61456-30 – 30 gpm
Fleck Control Valve Parts part number order
Made of Noryl Plastic, and is used on the Fleck 9100 Control Valve
Fleck Control Valve Parts part number order
1″ female NPT Stainless Steel Yoke for Fleck Valves. (Brass was used in the past)
Fleck 7000 Control Valve Parts
7000 Downflow Seal & Spacer Kit
Complete Service Assemblies
Only Parts shown in our online Picture, are included with this Brine Valve. Does not included BLFC fitting, (FL60010). Most folks re-use the old BLFC fitting. Most newer Fleck 2510 valves use this 1650 plastic Brine Valve Assembly.
Fleck Control Valve Parts part number order
Empty 5600 Power Head, Standard Housing w/PIN
Complete Service Assemblies
10913-1 & 10914-1 – Yellow (13″ – 18″ Used on Diameter Tanks)
Fleck Control Valve Parts part number order
Please Note:Tank “O” Ring (FL18303) & Slip Ring (FL19197) used with this Adapter Base, ARE NOT INCLUDED on this part. Used on Standard Resin Tank openings (2 1/2″ x 8 thread).
Fleck Control Valve Parts part number order
Used on Fleck Models 5000, 5600, 2510 & 8500 valves with the “SXT” Electronic Displays.
Complete Service Assemblies
5600 Filter Piston Assembly used non-softening (Backwash Only) applications. ** Back Wash and Rapid Rinse cycle times will be 15 minutes each. Includes Part Numbers FL13852, FL10696, FL13001, FL12953, and FL13446 Uses Seal Kit # FL60125
Complete Service Assemblies
Seals and Spacers Kit for the Fleck 5000, Proflo SE, and some others. Includes 5 Seals, 4 Spacers, and 1 Special End Spacer The Special End Spacer should be installed first, inside the valve body, followed by the a regular seal, and then alternating with spacers, and ending with a seal on top. Also used [...]
Complete Service Assemblies
Seals and Spacers Kit for the Fleck 5000, Proflo SE, and some others. Includes 5 Seals, 4 Spacers, and 1 Special End Spacer The Special End Spacer should be installed first, inside the valve body, followed by the a regular seal, and then alternating with spacers, and ending with a seal on top. Also used [...]