-
×
Screw - Program Wheel (FL13748)
1 × $0.50 -
×
Brine Valve Piston (FL14795)
1 × $33.00
-
×
5600 FL56C-G (Gray)
1 × $25.00
-
×
Top Distributor Basket 1.05 Bayonet Standard Mesh (TDB1050BS)
1 × $17.00
Fleck Control Valve Parts part number order
$47.00
Empty 5600 Power Head, Standard Housing w/PIN
Complete Service Assemblies
$48.00
10913-1 & 10914-1 – Yellow (13″ – 18″ Used on Diameter Tanks)
Basket Risers Riser Tubes and Distributor Tubes
32mm Standard Mesh Basket Riser for Fleck 7000 Valves Only (BD32MM + DT32MM-72)
$49.00
$50.00
FL13708 This Stainless Steel Yoke has 3/4″ Female threads, and is designed to be used on the Fleck 5600, 6600, 6700, 2510, 9000-3/4″ and the 9100 valves.
$50.00
FL 13398 Stainless Steel Yokes have replaced the old Brass Yokes that were used in the past, and will fit on the Fleck 5600, 6600, 6700, 2510, 9000-3/4″ and the 9100 valves.
Basket Risers Riser Tubes and Distributor Tubes
1.050 Inch by 54 Inch Fine Mesh Basket Riser (BRT1050-54-FR)
$50.00
Basket Riser for all Mineral Tanks 54″ and shorter using Fine Mesh resin. (Basket only shown in picture)
Brine Salt Tank Parts
Fleck 2310 Brine Valve Asm (FL2310BVSC) with 34″ Air Check Tube (FL60014)
$50.00
Fleck 2310 Brine valve assembly including valve, float assembly, and 34″ air check. The elbow connection is for 3/8″ Tubing.
Miscellaneous Parts
$50.00
1-1/4″ Cast Body. Maintains proper ratio of air to water in submersible water systems utilizing a bleed-back type of air control system.
Miscellaneous Parts
Square D Standard Duty Pressure Switch with Low Pressure Cut-off (FSG2M4)
$50.00
The standard for the industry for controlling electrically driven water pumps. Adjustable. 1 hp, 1/4″ FIPT. Set to 30-50 PSI.
Fleck Control Valve Parts part number order
$50.00
Please Note:Tank “O” Ring (FL18303) & Slip Ring (FL19197) used with this Adapter Base, ARE NOT INCLUDED on this part. Used on Standard Resin Tank openings (2 1/2″ x 8 thread).
Float Switches Valves
$52.00
Features a strong Alnico bar magnet hermetically-sealed inside so no other wetted material can contaminate liquid or be attacked by a corrosive liquid. Special molded thread helps when metal to plastic installations are used. Unique assembly procedure eliminates stress by actually suspending the reed switch allowing for thermal expansion and contraction. Round pivot pins add [...]
Fleck Control Valve Parts part number order
$52.00
Used on Fleck Models 5000, 5600, 2510 & 8500 valves with the “SXT” Electronic Displays.