Showing 513–528 of 668 results

$167.00

Old Part #’s FL14927, FL18738 & FL42250 Drive Motor (FL18738 or FL61633-01), used on Fleck 9000,9100 & 9500 twin tank valves to operate pistons during regeneration cycle. If the valve gears are not turning, check the condition of the Middle Drive Gear (FL15135-02). If this gear is damaged, it can end up being the real [...]

$178.00

Electronic Meter Cap, Only – (No Wiring) Includes 13847 “O” Ring, and is used on Fleck 3/4″, 1″, 1 1/2″ and 2 inch Electronic Meter Assemblies. This Fleck Part #14716 is used on the following Fleck Control Valves – 2750, 2850, 2900, 9000, 9100, 9500 and also on the XT or 3200 NXT timer/controllers.

$179.00

REPLACEMENT PARTS: Lamp (602804) – Replace Every 12 Months Quartz Sleeve (602731) – Replace Every 24 Months Or As Needed

Brine Salt Tanks

Round 18×40 Brine Tank

$184.00

Includes Brine Well & Safety Float.

$185.00

FL60354 Complete with 120 volt 60 Hertz, 1/30 rpm Timer Motor, all internal gears, meter cable, back cover and power cord.

Out of stock

Fleck Control Valve Parts part number order

7000SXT Circuit Board FL61696

$185.00

New 7000SXT Circuit Board # 61969, replaces the old part SE #61460, that is no longer available. Older 7000 circuit boards were labeled PN 40595 & 41090

$189.00

Fleck 3200 12 – Day Timer Powerhead for Water Softeners, Manganese Greensand filters, & Backwashing Filters, using the Fleck 1500, 2500, 2510 and 2750 Valves. **Does not include Valve Body or the Brine Piston Assembly. NOTE: If you need a cover: This power head only uses the Environmental Cover with Hinge Pin, # FL60219-02 Older [...]

Fleck Control Valve Parts part number order

SXT Circuit Board (FL61673-0201)

$189.00

Circuit Board Only, (Used on 5600SXT Valve)

Fleck Control Valve Parts part number order

Meter Cover Assembly, Brass, (Extended) (FL15237)

$190.00

(Picture shown, is a Standard Brass Meter Cover). Brass Meter Cover, used on the Fleck 2750, 2900, 3150, 9000 & 9500 valves. Plz specify what the gallon range is, on your existing meter dial, when placing order. Normally installed on larger systems, that has a Meter Dial that reads from 1,550 to 26,350 gallons. Will [...]

$192.00

The Commercial Potassium Permanganate tank (18″x33″) is used with a filter containing Manganese Greensand. A recommended dose of 2-4 ounces of Potassium Permanganate per cubic foot of Manganese Greensand is suggested for regeneration. The tank has a liquid capacity of 20 gallons. 1.) 18″ x 33″ Brine Tank w/Salt Grid 2.) Pad on top of [...]

$195.00

Complete 5600SXT Circuit Board with Front Cover used to replace the old SE Front Cover and circuit board. This part is very simple to replace…! We have different “SXT” Control covers available for the following Fleck control valves that have the old “SE” modual, as shown. ProFlowSE 5600SE 2510SE 9100SE

Fleck Control Valve Parts part number order

1″ Meter Cover Assembly, Brass, (Standard) (FL15218)

$195.00

Brass Standard Range Meter used on the following Fleck Valves: 2750,2850,2900,2900S,9000 or 1″,9100 3/4″ or 1″ FL15218 is the brass meter cap assembly for a 3/4″ to 2″ mechanical meter assemblies -(usually for HW or Cold water) When used on the Fleck 1-1/2 ” 2850 & 9500 valves, Meter range is from, 0 – 100 x [...]