Fleck Control Valve Parts part number order
Brass Standard Range Meter used on the following Fleck Valves: 2750,2850,2900,2900S,9000 or 1″,9100 3/4″ or 1″ FL15218 is the brass meter cap assembly for a 3/4″ to 2″ mechanical meter assemblies -(usually for HW or Cold water) When used on the Fleck 1-1/2 ” 2850 & 9500 valves, Meter range is from, 0 – 100 x [...]
Fleck Control Valve Parts part number order
Tool used to make removal of Seals and Spacers in the Fleck 2850 and 9500 Valves easier.
Complete Service Assemblies
Fleck 1500, 2500, 2510, 2750 Meter Powerhead (FL2510M-EPH) FL60407
Complete Power Head with Standard Range (0 – 2100 gallons) 3210 Metered Timer assembly for Fleck 1500, 2500, 2510 and 2750 Valves. **Does not include Valve Body or the Brine Piston Assembly. NOTE: If you need a cover: This power head only uses the Environmental Cover with Hinge Pin, # FL60219-02 Older Style covers that [...]
Complete Service Assemblies
Solid Brass Valve Body, 2750
Optional 1″ Solenoid Kit. This solenoid will stop the water flow if the lamp fails.
Hot Water Mineral Tanks
10 x 44 Inch Fiberglass Hot Water Mineral Tank (FT1044-AHW) ***Special Order***
Structural Fiberglass Hot Water Tank
Brine Salt Tank Parts
Legs on Grid are 10″ Tall
Hallett Lamps & Sleeves
(Lamp length is approximately 17″)
Brine Salt Tank Parts
Top Part – FL60038 – Fleck 2350 Brine Valve Shut Off Includes FL60028 Float & 900 Air Check Normally used with the 1800 brine systems that use 3/4″ tubing. It can also be used with the 1700 brine systems that use 1/2″ tubing, but you will need to use a reducer fitting to “bush” down [...]
Hallett Lamps & Sleeves
(Lamp length is approximately 21″)
Fleck Control Valve Parts part number order
Upper Puller Tool Assembly, 2900, 3100 & 3150 Valves (FL12682)
Tool used to make removal of Seals and Spacers in the Fleck 2900 Valve easier.
Complete Service Assemblies
Complete 5600SXT Timer Power Head, Including SXT Circuit Board, 24 volt Motor, Gears & Power Cord This Power Head is very simple to replace…!