KDF CanPro Mediaguard
Complete cartridge system includes 4 pounds of KDF85 media installed in a 4 cartridge system. The Media Guard Will Not work on a Fleck 7000 Valve, as the 7000 valve has a 32mm diameter riser tube, that will not fit into the 1.05″ hole in the Media Guard. ** A valve adaptor is automatically included, [...]
KDF CanPro Mediaguard
Complete cartridge system includes 4 pounds of KDF55 media installed in a 4 cartridge system. The Media Guard Will Not work on a Fleck 7000 Valve, as the 7000 valve has a 32mm diameter riser tube, that will not fit into the 1.05″ hole in the Media Guard. ** A valve adaptor is automatically included, [...]
Residential
Packages include 1″ Brass Cross, Square D Standard Duty Pressure Switch (FSG2), Pressure Gauge, 1/2″ Boiler Drain, 1/2″ Stop & Waste Valve, Relief Valve and Brass Nipples. 1″ version for WellMate models WM4, WM6, WM9, WM12.
Residential
Packages include 1″ Brass Cross, Square D Standard Duty Low Pressure Cut-out Switch (FSG2M4), Pressure Gauge, 1/2″ Boiler Drain, 1/2″ Stop & Waste Valve and Brass Nipples. 1″ version for Well-X-Trol models WX202 and WX203.
Pot Perm Tanks
The Commercial Potassium Permanganate tank (18″x33″) is used with a filter containing Manganese Greensand. A recommended dose of 2-4 ounces of Potassium Permanganate per cubic foot of Manganese Greensand is suggested for regeneration. The tank has a liquid capacity of 20 gallons. 1.) 18″ x 33″ Brine Tank w/Salt Grid 2.) Pad on top of [...]
Hot Water Mineral Tanks
10 x 44 Inch Fiberglass Hot Water Mineral Tank (FT1044-AHW) ***Special Order***
Structural Fiberglass Hot Water Tank
Brine Salt Tank Parts
Legs on Grid are 10″ Tall
Brine Salt Tank Parts
Top Part – FL60038 – Fleck 2350 Brine Valve Shut Off Includes FL60028 Float & 900 Air Check Normally used with the 1800 brine systems that use 3/4″ tubing. It can also be used with the 1700 brine systems that use 1/2″ tubing, but you will need to use a reducer fitting to “bush” down [...]
Hot Water Mineral Tanks
Structural Fiberglass Hot Water Tank