2 Inch Commercial Hub and Lateral Distributors (D717910) 
Fleck 9000 Control Valve Parts
Injector/ Drain Module used on the Fleck 9000 and 9100 control valves. Includes new injectors, o-rings, BLFC and DLFC, based on resin tank diameter.
Plumbing or threaded side of Bypass Valve or compression side of Bypass
Plumbing or threaded side of Bypass Valve or compression side of Bypass
Basket Risers Riser Tubes and Distributor Tubes
13/16 Inch by 54 Inch Standard Mesh Basket Riser (BRT1316-54)
Household Cleaners
White Brite Laundry Whitener 22 oz. Bottle (Case of 6) (WHITE BRITE CASE)
(Previously called Pro Yellow Out and Pro Laundry Whitener) Save 33% per bottle!
Complete Service Assemblies
Piston Assembly, 5600SE, 5600SXT and 6700 (Softener) (FL60102-71)
Standard Softener Piston Assembly for Fleck 5600SXT & 6700 valves. Will have a GREEN Cap. Uses Seal Kit # FL60125
Carbon & KDF 55
1/2 cubic foot. Coconut shell carbon, because it is comprised of predominantly microporous structures, is a superior performing product for the removal of chlorine, chlorinated solvents and VOCs. It is also harder and can stand up to more backwashing than bituminous coal based carbon. 12 x 30 Mesh. Carbon Specifications
Complete Service Assemblies
Used on Fleck 2900s (Upper Piston), If you have a 1 Piece “S” Casting, then you should use Fleck Part # 61540 Piston Assembly (With the Seal Kit # 61530), that has a longer Shaft. These Parts can be located on page 12, of the Fleck 2900s Service Manual, Items # 33 & 34.
BigBlue 20" Carbon
Fits any housing that uses 4-1/2″ x 20″ cartridges 4 gpm flow rate
Fleck Control Valve Parts part number order
Stripped 3/4″ Meter Body. Includes 4ea Adapter “O” Rings (FL13305), only. All other parts for this meter body should be purchased separatley. This plastic 3/4″ meter Body commonly used on 5600, 2510 & 9000 valves.
Inline Carbon Filters
Pentek 4-1/2″ x 9-3/4″ GAC Granular Activated Carbon Cartridge (GAC-BB)
Fits any housing that uses 4-1/2″ x 9-3/4″ cartridges 4 gpm flow rate
Residential
Certified by NSF, Standard 58, US FDA approved. Storage Tank dimensions are approx. 9.5″ D x 17″ H (with valve on top of tank).
