$101.00

An excellent medium density filtration media which works well in multi-media filter applications. Provides higher service flow rates and longer filter runs than equivalent sand filters. Anthracite Specifications

Out of stock
$101.00

ChemSorb Filter Granules are used as a water/liquid, filter bed (or tank) material in lieu of sand/anthracite, pecan shells or other, coarse filtration material to efficiently remove suspended solids and fine turbidity particles. The filter granules physically filter and trap the suspended solids. In addition, the granules remove a wide range of colloidal and soluble, [...]

Fleck Control Valve Parts part number order

Stuffer Tool (FL11098)

$101.00

Fleck Stuffer Tool that helps when installing seals and spacers in Fleck 2500, 2510, 2700, 2750, 2900 ( upper ) & 3600 Valve seal kit.

Out of stock
$102.00

8 gpm flow rate 2-3/4 x 9-3/4

$105.00

1″ adjustable PVC Air Injector. Requires a minimum 1.5 gpm & maximum 15 gpm flow rate to operate properly.

$105.00

3200 Timer Assembly with 7 Day Skipper Wheel. Includes 120 volt Timer Motor and wiring harness. For use on Fleck 1500, 2500, 2510, 2750, 2800 & 2900 Drive Assemblies.

Softener, Tannin & Nitrate Resin

Indion Fine Mesh Water Softener Resin 0.5 Cubic Ft

$105.00

$106.00

Save 46% per bottle! Use 3 ounces of Softener Mate, per cu/ft of resin, mixed with at least 1 quart of warm water for softener units less than 2 cuft, and up to 3 – 5 gallons of warm water, for larger commercial units.

BigBlue 20" Carbon

MAXCYST-FF20

$107.00

Long life + cysts 4-5/8 inch OD 20 inch Length 0.5 micron nominal rating 150000 gallons of Chlorine Reduction tested at 2 ppm of chlorine 4 gpm flow rate

Out of stock
$108.00

7 gpm flow rate 2-3/4 x 9-3/4

Out of stock

Fleck Control Valve Parts part number order

Motor, 24V, 60 Hz., 1/15 RPM (FL19169)

$108.00

This 1/15 RPM Motor is Rare. Used on some Fleck and other brands using Fleck type valves. Be sure this is what you need before placing your order.