Fleck 9000 Control Valve Parts
Lower Piston Assembly used on the Fleck 9000 & 9100 valves
Uncategorized
2″, 100gpm, 60 Mesh (254 micron). 1/2″ MIPT drain cleanout with cap. High impact, molded, non-corrosive filters with reusable polyester filter screens. Clear sump permits monitoring of trapped sediment.
2″, 100gpm, 100 Mesh (152 micron). 1/2″ MIPT drain cleanout with cap. High impact, molded, non-corrosive filters with reusable polyester filter screens. Clear sump permits monitoring of trapped sediment.
Fine mesh Cation Softening ion exchange resin for use in any water softening system, with Clear Water Iron levels between 4-8 ppm. 1/2 cubic foot.Cation Resin Specifications Cation Resin MSDS
Iron Removal Media
KDF-85 Process media is most effective in removing iron and hydrogen sulfide from water. Like water softener resin, KDF-85 is regenerated with sodium chloride brine. Patented KDF process media are 100% recyclable and contain no chemical additives. KDF media is used to help safely reduce or remove chlorine, iron, hydrogen sulfide, heavy metals and bacteria [...]
Carbon & KDF 55
KDF 55 Process Medium is a high-purity copper-zinc alloy. When used in a water treatment unit, it undergoes a chemical process known as redox. Redox is short for oxidation-reduction, which is a chemical reaction where electrons are transferred between molecules. In some cases, such as free chlorine, this transfer results in the formation of benign [...]
Carbon & KDF 55
1 cubic foot. Coconut shell carbon, because it is comprised of predominantly microporous structures, is a superior performing product for the removal of chlorine, chlorinated solvents and VOCs. It is also harder and can stand up to more backwashing than bituminous coal based carbon. 12 x 30 Mesh. Carbon Specifications
Pro Products Supplies
Pro Res Care 1 gal. Containers (Case of 4) (RES CARE-G CASE)
Note: Only full case quantity may be ordered. (Quart container shown in picture).
1/2 cubic foot. Low pH, Acidic water slowly dissolves Calcite media, to help raise the pH from 5.0 to 7.0. As the Calcite media dissolves, it will also increase the hardness of your water. (I.E. If your pH level is 6.0, the Calcite media will increase your water hardness 4 – 5 grains per gallon, [...]