Complete Service Assemblies
Used on Fleck 2750 & 2900 (Upper Piston), 2 Piece Casting Valves, when the backwash flow rate is higher than 7 GPM, or if the Service Flow Rate is higher that 12 GPM. If you have a 1 Piece Casting, then you should use Fleck Part # 61540 & Seal Kit, that has a longer [...]
Complete Service Assemblies
10913-1 & 10914-1 – Yellow (13″ – 18″ Used on Diameter Tanks)
Pot Perm Tanks
The Commercial Potassium Permanganate tank (18″x33″) is used with a filter containing Manganese Greensand. A recommended dose of 2-4 ounces of Potassium Permanganate per cubic foot of Manganese Greensand is suggested for regeneration. The tank has a liquid capacity of 20 gallons. 1.) 18″ x 33″ Brine Tank w/Salt Grid 2.) Pad on top of [...]
Uncategorized
2″, 5-90 gpm, 60 mesh (254 micron). Head design creates centrifugal force to separate particulate matter from water. Screen after filter prevents small particles from reentering product water.
Fleck 3/4" Valves
Fleck 5600 3/4 Inch Manganese Greensand 12 Day Timer Control Valve
Fleck 5600 Specifications When ordering a Fleck Control Valve, it is necessary for us to know the Height and Diameter of the tank the valve will be installed on. We will set the Fleck valve up to operate properly based on the size of the tank YOU specify for Tank Diameter and Tank Height. Please [...]
Fleck 3/4" Valves
Fleck 2510 3/4 Inch Manganese Greensand System Timer Control Valve
Fleck 2510 Specifications When ordering a Fleck Control Valve, it is necessary for us to know the Height and Diameter of the tank the valve will be installed on. We will set the Fleck valve up to operate properly based on the size of the tank YOU specify for Tank Diameter and Tank Height. Please [...]
Fleck 3/4" Valves
Fleck 1500 3/4 Inch Manganese Greensand System Timer Control Valve
When ordering a Fleck Control Valve, it is necessary for us to know the Height and Diameter of the tank the valve will be installed on. We will set the Fleck valve up to operate properly based on the size of the tank YOU specify for Tank Diameter and Tank Height. Please measure your tank [...]
Replacement ballast (detachable power cord sold separately) for SQ-PA, S1Q-PA, S2Q-PA, S5Q-PA, S8Q-PA, S12Q-PA.
Brine Salt Tank Parts
Fleck 2310 Brine Valve Asm (FL2310BVSC) with 34″ Air Check Tube (FL60014)
Fleck 2310 Brine valve assembly including valve, float assembly, and 34″ air check. The elbow connection is for 3/8″ Tubing.
Iron Filters
1″ adjustable PVC Air Injector. Requires a minimum 1.5 gpm & maximum 15 gpm flow rate to operate properly.
This low voltage pump is designed to operate continuously at near constant pressure until the product water tank is full. The output pressure is dependent on the reverse osmosis system’s total flow requirement, feed water pressure and available power source. These booster pumps are to be installed on the raw water line feeding the RO [...]
Iron Removal Media
KDF-85 Process media is most effective in removing iron and hydrogen sulfide from water. Like water softener resin, KDF-85 is regenerated with sodium chloride brine. Patented KDF process media are 100% recyclable and contain no chemical additives. KDF media is used to help safely reduce or remove chlorine, iron, hydrogen sulfide, heavy metals and bacteria [...]