$44.00

Fits any housing that uses 4-1/2″ x 20″ cartridges 25 gpm flow rate

$45.00

The standard for the industry for controlling electrically driven water pumps. Adjustable to 65 psi. 1 hp, 1/4″ FIPT.

$45.00

$19.50 per tube price. These Tubes will work on both the “45 & 85” Series Stenner Pumps. Output on the “45” model will be 10 GPD Output on the “85” Model will be 17 GPD

Out of stock

Fleck 7000 Control Valve Parts

7000 Seal & Spacer Kit FL61438

$45.00

7000 Downflow Seal & Spacer Kit

$45.00

These Tubes will work on both the “45 & 85” Series Stenner Pumps. Output on the “45” model will be 3 GPD Output on the “85” Model will be 5 GPD

$45.50

Only Parts shown in our online Picture, are included with this Brine Valve. Does not included BLFC fitting, (FL60010). Most folks re-use the old BLFC fitting. Most newer Fleck 2510 valves use this 1650 plastic Brine Valve Assembly.

Float Switches Valves

Mechanical Float Valve (FV03)

$46.00

These float valves are completely mechanical and require no electrical power or wiring. Mechanical linkage of float and valve assures positive on-off action. When liquid levels drop, the float drops and activates the tank fill. When levels rise, the float rises and turns off the fill. These valves are fitted with an adjustable arm and [...]

$47.00

Use 3 ounces of Softener Mate, per cu/ft of resin, mixed with at least 1 quart of warm water for softener units less than 2 cuft, and up to 3 – 5 gallons of warm water, for larger commercial units.

$47.00

Fits any housing that uses 4-1/2″ x 9-3/4″ cartridges 4 gpm flow rate

Fleck Control Valve Parts part number order

5600 Housing, with pin (FL14448-000)

$47.00

Empty 5600 Power Head, Standard Housing w/PIN

$48.00

10913-1 & 10914-1 – Yellow (13″ – 18″ Used on Diameter Tanks)