Showing 1–16 of 26 results

Complete Service Assemblies

5600/4600 Brine Valve (FL60032)

$9.50

Brine Valve Piston Assembly for Fleck 5600 Valves Includes Part Numbers FL13302 x2, FL13172, FL12626, FL13165, FL13167, FL12550, FL11973, FL16098, and 11981-01

Complete Service Assemblies

Piston End Plug Assembly (FL13446)

$9.50

Used on Fleck Residential Piston Assemblies

Complete Service Assemblies

5600 FL56C-G (Gray)

$25.00

Plastic Cover that simply slips over the top of the 5600 Powerhead, that helps protect it from Dust/Sun/Weather. Will Not work on the Electronic 5600SXT Model valve.

Complete Service Assemblies

Piston Assembly, Filter (FL60102-10)

$34.50

5600 Filter Piston Assembly used non-softening (Backwash Only) applications. ** Back Wash and Rapid Rinse cycle times will be 15 minutes each. Includes Part Numbers FL13852, FL10696, FL13001, FL12953, and FL13446 Uses Seal Kit # FL60125

Complete Service Assemblies

Seal & Spacer Kit (FL60125)

$35.00

Seal & Spacer Kit for the Fleck 5600, 9000 & 9100 valves. (Top Seals & Spacers 9000, and 9100 Valves.) Includes 5 Seals (FL13242) & 4 Spacers (FL14241) included with each Kit. (Not Sold Separately)

$35.00

Seals and Spacers Kit for the Fleck 5000, Proflo SE, and some others. Includes 5 Seals, 4 Spacers, and 1 Special End Spacer The Special End Spacer should be installed first, inside the valve body, followed by the a regular seal, and then alternating with spacers, and ending with a seal on top. Also used [...]

$38.00

** Low Water Softener Piston Assembly for Fleck 5600 Mechanical (Non-SXT) valves. Will have a GRAY Cap. ** Back Wash and Rapid Rinse cycle times will be 7 minutes each. Uses Seal Kit # FL60125

$45.00

Standard Softener Piston Assembly for Fleck 5600SXT & 6700 valves. Will have a GREEN Cap. Uses Seal Kit # FL60125

Complete Service Assemblies

Piston Assembly, Standard (FL60102-00)

$50.00

For Water Softeners & Manganese Greensand units. ** Back Wash and Rapid Rinse cycle times will be 10 minutes each. Standard Piston Assembly for Fleck 5600 valves used since 1979, will have a White Cap. Includes Part Numbers FL13247, FL10696, FL13001, FL12953, and FL13446 Uses Seal Kit # FL60125

Complete Service Assemblies

5600 Injector Assembly (FL60084-0132)

$64.50

This 5600 injector assembly includes a new injector throat & nozzle, o-rings, BLFC & DLFC flow control buttons. The BLFC & DLFC buttons will be based on the diameter of your resin tank. Includes part numbers FL60032, FL13315 x2, FL13303, FL13163, FL10913U, FL10914, FL10227, FL13166, FL10329, FL10330, FL10332, BLFC Button, FL12977, FL13245, FL13244, FL12767, FL15348

Complete Service Assemblies

5600 Softener Rebuild/Combo Kit (OPW56KIT)

$75.00

For Water Softeners & Manganese Greensand units. Includes: 1ea Standard Piston Assembly -FL60102-00 1ea Seal/Spacer Kit – FL60125

$75.00

For Backwashing Filters ONLY…! WILL NOT work on Water Softeners or Greensand Filters. Includes: 1ea Filter Piston Assembly -FL60102-10 1ea Seal/Spacer Kit – FL60125

$79.50

Piston and shaft Assembly used on the Fleck Downflow 5000, Proflo SE, and others water softener control valves. May also used on some of the newer Rainsoft Valves, that use the Fleck 5000 Valve Body design.

$89.00

For Water Softeners & Manganese Greensand units. Includes: 1ea Standard Piston Assembly -FL60102-00 1ea Seal/Spacer Kit – FL60125 1ea Brine Valve – FL60032

Complete Service Assemblies

Meter Cover Assembly, Standard (FL14038)

$107.00

Used on several Fleck Metered Valves. Including the Fleck 5600, 9000 & 9100. Includes Meter Cover Assembly “O” Ring # FL13847

$147.00

Complete Meter Module includes meter cover, meter body, impeller, orings, mounting clips, and screws. This is the standard range 3/4″ meter used on residential Fleck Econominder Valves. This standard range meter has a program wheel with numbers 0 – 21 (0 – 2,100 gallons maximum capacity setting ).