6″ x 1-1/2″ socket. Designed for use with 14″ – 24″ mineral tanks with a 4″ top opening and top mounted control valves.
Float Switches Valves
These float valves are completely mechanical and require no electrical power or wiring. Mechanical linkage of float and valve assures positive on-off action. When liquid levels drop, the float drops and activates the tank fill. When levels rise, the float rises and turns off the fill. These valves are fitted with an adjustable arm and [...]
Spindown Parts
Replacement Filter Screen for VuFlow 2 inch 60 mesh T Profile Sand Separator (FS20060)
254 Micron Filtration 10″ Long
Spindown Parts
Replacement Filter Screen for VuFlow 2 inch 100 mesh T Profile Sand Separator (FS200100)
152 Micron Filtration 10″ Long
Pro Products Supplies
Use 3 ounces of Softener Mate, per cu/ft of resin, mixed with at least 1 quart of warm water for softener units less than 2 cuft, and up to 3 – 5 gallons of warm water, for larger commercial units.
BigBlue 10" Carbon
Fits any housing that uses 4-1/2″ x 9-3/4″ cartridges 4 gpm flow rate
Fleck Control Valve Parts part number order
Empty 5600 Power Head, Standard Housing w/PIN
Complete Service Assemblies
10913-1 & 10914-1 – Yellow (13″ – 18″ Used on Diameter Tanks)
Basket Risers Riser Tubes and Distributor Tubes
32mm Standard Mesh Basket Riser for Fleck 7000 Valves Only (BD32MM + DT32MM-72)
Pro Products Supplies
This Feeder automatically adds about 1 ounce of ResCare Cleaner, each time the unit regenerates, and holds one quart of Liquid Cleaner. Res-Up Feeders are simple to install and operate. Res-Up Feeder Installation Instructions
FL13708 This Stainless Steel Yoke has 3/4″ Female threads, and is designed to be used on the Fleck 5600, 6600, 6700, 2510, 9000-3/4″ and the 9100 valves.