Fleck Control Valve Parts part number order
Stripped Bare, Plasic Backplate, used on the power head of the Fleck 9000, 9100, and 9500 valves.
Complete Service Assemblies
Does not include cams or micro switches Drive Motor – 115V, 60 Hz, SP, Fam 1 Used on the Fleck 2510, 2750, 2850 & top of 2900 valves
QS-740. 15 gpm SPV units. (Includes 2 o-rings).Â
Culligan Compatible
This set includes one each of: S7011C 5 micron sediment pre-filter 32-175-050-100 carbon block pre-filter TFM-36A Desal Osmonics 36 gpd membrane, part number 1224436 Granular Activated Carbon Post-Filter (K2333-XX). NOTE: The membrane shipped may be Applied Membranes model number M-T1812A36-CUL due to product availability.NOTE: Select JJ series for 1/4″ tubing or KK series for 3/8″ [...]
Nimbus Sierra Filters
Stage 3: The reverse osmosis membrane reduces dissolved salts, metals, microorganisms and other impurities. (Replace every 12 months). .Membrane Storage Tip – RO Membrane cartridges that will not be installed or used immediately, should be stored in a refrigerator to help prevent contamination of the cartridge. (Do Not Freeze…!)
Complete Service Assemblies
Used on Fleck 2750 & 2900 (Upper Piston), 2 Piece Casting Valves, when the backwash flow rate is higher than 7 GPM, or if the Service Flow Rate is higher that 12 GPM. If you have a 1 Piece Casting, then you should use Fleck Part # 61540 & Seal Kit, that has a longer [...]
Complete Service Assemblies
Piston and shaft Assembly used on the Fleck Downflow 5000, Proflo SE, and others water softener control valves. May also used on some of the newer Rainsoft Valves, that use the Fleck 5000 Valve Body design.
Replacement Media
1/2 cubic foot. Filter Ag is a very efficient filter medium for the removal of suspended material and turbidity. Less pressure loss and finer filtration is possible because of its light weight and irregular surface characteristics. Filter Ag Plus Specifications
HSI Designer Non Air Gap Lead Free Faucets
Hydro Systems Intl Euro Style Designer Long Reach Lead Free Faucet Chrome (HF977C)
Pot Perm Tanks
FL2300 valve Assembly including brass valve, float assembly and air check, fits commercial potassium permanganate tank PT183303.