Base Price $90.00

1 1/2″, 50gpm, 60 Mesh (254 micron). 1/2″ MIPT drain cleanout with cap. High impact, molded, non-corrosive filters with reusable polyester filter screens. Clear sump permits monitoring of trapped sediment.

Base Price $90.00

1 1/2″, 50gpm, 100 Mesh (152 micron). 1/2″ MIPT drain cleanout with cap. High impact, molded, non-corrosive filters with reusable polyester filter screens. Clear sump permits monitoring of trapped sediment.

Complete Service Assemblies

5600 Injector Assembly (FL60084-0132)

$90.00

This 5600 injector assembly includes a new injector throat & nozzle, o-rings, BLFC & DLFC flow control buttons. The BLFC & DLFC buttons will be based on the diameter of your resin tank. Includes part numbers FL60032, FL13315 x2, FL13303, FL13163, FL10913U, FL10914, FL10227, FL13166, FL10329, FL10330, FL10332, BLFC Button, FL12977, FL13245, FL13244, FL12767, FL15348

$90.00

Cartridge size – 7-3/4″ x 19-1/2″

$90.00

3900 Valve Lower Seal Spacer Kit Includes: 4 – Seals #16068 2 – Narrow Spacers #16069 1 – Wide Spacer #16070. (The 3900 Top Seal KIt is Fleck part #60131) This Part can be located on page 6, of the Fleck 3900 Service Manual.

$91.00

.38 cubic foot bag, 50 lbs. #8-12 Garnet is a high hardness, high density filter material used as a support bed in backwashing filters with heavy medias such as Filox, Pyrolox, Calcite, Filter Sand, Chemsorb, Birm & Greensand. Garnet Specifications

$91.00

.38 cubic foot bag, 50 lbs. #8 Garnet is a high hardness, high density filter material used as a support bed in backwashing filters with heavy medias such as Filox, Pyrolox, Calcite, Filter Sand, Chemsorb, Birm & Greensand. Garnet Specifications

$91.00

.36 cubic foot bag, 50 lbs. #30-40 Garnet is a high hardness, high density filter material used as a support bed in backwashing filters with heavy medias such as Filox, Pyrolox, Calcite, Filter Sand, Chemsorb, Birm & Greensand. Garnet Specifications

$92.00

Used on the Fleck 2850s Model Valve

Out of stock
$93.00

3/4 cubic foot. Coconut shell carbon, because it is comprised of predominantly microporous structures, is a superior performing product for the removal of chlorine, chlorinated solvents and VOCs. It is also harder and can stand up to more backwashing than bituminous coal based carbon. 12 x 30 Mesh. Carbon Specifications

$93.00

Cartridge size – 7-3/4″ x 19-1/2″

Out of stock
$94.00

Stage 3: The reverse osmosis membrane reduces dissolved salts, metals, microorganisms and other impurities. (Replace every 12 months). .Membrane Storage Tip – RO Membrane cartridges that will not be installed or used immediately, should be stored in a refrigerator to help prevent contamination of the cartridge. (Do Not Freeze…!)

Out of stock
$94.50

This set includes one each of the S7028, S7025, and S1229RS membrane and will only work on Rayne TFC systems without the “-RC” suffix on the pre and post filters. This set also includes the 6″ in-line carbon post-filter. Choose S7206W with 3/8″ threaded connections (replaces S7206C and S7206C-06) or the newer S7206W-JG with 3/8″ [...]